Especially useful for non-destructive examination methods that require repeatable tests of the same inspection points to ensure accurate results.
Inspection Point Labels are designed to identify inspection locations on non-insulated pipes and equipment in order to monitor their structural integrity and to detect surface and subsurface defects.
NDT Labels are used in Process Safety Management in industries that require NDT and have formalised processes for its use, including the oil & gas, chemical, petrochemical, maritime, food processing and transportation sectors.
Some labels are equipped with a text field to record data, additionally secured with a clear laminate to seal the written information. Each label is resistant to chemicals such as isopropyl alcohol, detergents, engine oils and moisture.
All formats: matt silver topcoated polyester, protected by a UV laminate.
Apply at +15 °C minimum, on a surface at room temperature or slightly above 
Clean and dry the surface first: remove loose dirt, grease or corrosion with isopropyl alcohol or heptane 
Rub down firmly: the higher the pressure, the stronger the adhesive bond The adhesive is a high-performance acrylic for strong bonding, also on rough surfaces. The initial bond is achieved through rub-down pressure; the acrylic adhesive takes 48 to 72 hours to reach 90 % of the final bond strength and two weeks to achieve 100 % bond strength.
Values as published in the MF10 technical datasheet.
Shelf-life: at least 24 months from date of dispatch, stored in the original packaging at 21 °C and 50 % relative humidity.
Inspection points measured, marked and re-found - NDT labelling in the field.
