MF10 NDT
Inspection Point Labels

They are especially useful for non-destructive examination methods that requires
repeatable tests of the same inspection points to ensure accurate results.

Description

Files

General description

Inspection Point Labels are designed to identify inspection locations on non-insulated pipes and equipment in order to monitor their structural integrity and to detect surface and subsurface defects.

NDT Labels are used in Process Safety Management in industries that require NDT and have formalised processes for its use, including oil & gas, chemical, petrochemical, maritime, food processing and transportation sectors. Some non-destructive labels are equipped with the text field to record data, additionally secured with a clear laminate to seal written information. Each label is resistant to chemicals such as isopropyl alcohol, detergents, engine oils and moisture.

Label 01

Size:
75mm x 100mm
Inspection hole size
⌀ 32mm
PROTECTION
UV Laminate
EXTRA FEATURES
– blank space for write-on inscription
– equipped with a self-adhesive laminate to secure the written information
AVAILABILITY
6 pcs / sheet

Label 02

Size:
75mm x 50mm
Inspection hole size
N/A
PROTECTION
UV Laminate
EXTRA FEATURES
– blank space for write-on inscription
– equipped with a self-adhesive laminate to secure the written information
AVAILABILITY
9 pcs / sheet

Label 03

Size:
25mm x 50mm
Inspection hole size
⌀ 20mm
PROTECTION
UV Laminate
EXTRA FEATURES
– blank space for write-on inscription
– equipped with a self-adhesive laminate to secure the written information
AVAILABILITY
24 pcs / sheet

Label 04

Size:
⌀ 40mm
Inspection hole size
N/A
PROTECTION
UV Laminate
EXTRA FEATURES
N/A
AVAILABILITY
10 pcs / sheet

Label 05

Size:
⌀ 32mm
Inspection hole size
⌀ 20mm
PROTECTION
UV Laminate
EXTRA FEATURES
N/A
AVAILABILITY
10 pcs / sheet

Label 06

Size:
40mm x 40mm
Inspection hole size
⌀ 16mm
PROTECTION
UV Laminate
EXTRA FEATURES
– blank space for write-on inscription
– equipped with a self-adhesive laminate to secure the written information
AVAILABILITY
10 pcs / sheet

Application guidelines

The minimum temperature for NDT Labels application is + 15°C.

To obtain the best bonding conditions, the application surface must be clean, dry and at room temperature or slightly above. Any loose dirt, grease, or corrosion should be removed with isopropyl alcohol or heptane before the application.

The adhesive is a high performance acrylic for strong bonding also on rough surfaces.
The initial bond is achieved through a rub down pressure. The higher pressure, the stronger the adhesive bond. The acrylic adhesive takes 48-72 hours to reach 90% of the final bond strength and two weeks
to achieve 100% bond strength.

Technical specification

Material	Matt silver topcoated polyester with a UV laminate
Adhesive	High temperature resistant acrylic
Operating temperature	-40°C to +150°C
Min. Application temperature	+15°C
Solvent resistance	Resistant to solvent and mild chemicals
Fungus resistance	Resistant to fungi
UV resistance	Excellent
Thickness (with release paper)	190 mic
Thickness (without release paper)	145 mic
Adhesion to steel (FINAT FTM1 – 72h at standard conditions)	29,4N/25mm

Maintenance and storing

Shelf life of NDT Labels is at least 24 months from date of dispatch, when stored in the original packaging at 21°C and 50% relative humidity.